Regular maintenance is essential to keep your Honda Forza 750 reliable, safe, and performing at its best. Following the recommended service intervals helps ensure optimum engine performance, fuel efficiency, riding comfort, and long-term durability.

Before carrying out any scheduled maintenance, always perform the Pre-Ride Inspection described in the Owner’s Manual.

The maintenance items listed in the schedule should be inspected, cleaned, adjusted, lubricated, or replaced as required:

  • I – Inspect
  • C – Clean
  • A – Adjust
  • L – Lubricate
  • R – Replace

Some maintenance procedures require specialized tools, technical information, or mechanical expertise. If you are not familiar with a particular procedure, Honda recommends having the work performed by an authorized dealer or qualified technician.

Proper maintenance not only extends the life of your Forza 750 but also contributes to safer and more enjoyable riding throughout the year.

Code Market / Destination
ED Europe (European Direct Sales), including countries such as the Netherlands, Belgium, Germany, the United Kingdom, etc.
GS Gulf States (GCC): United Arab Emirates, Saudi Arabia, Qatar, Kuwait, Bahrain, and Oman.
KO South Korea.
FO Taiwan.
CH This code does not appear in the official Forza 750 manuals. On some other Honda models, CH is used for specific countries or markets, but it does not seem to be a standard destination code for the Forza 750. It may be an internal Honda code found in certain parts databases.

ED, KO, FO TYPES

Items (Distance in km) 1.000   12.000   24.000   36.000   48.000   Annual check Regular replace
Fuel line IIII I
Throttle operation IIII I
Air cleaner RR
Crankcase breather CCCC
Spark plug IR
Valve clearance II
Engine oil RRRRR R
Engine oil filter RRR
Clutch oil filter RRR
Engine idle speed IIII I
Radiator coolant IIII I3 years
Cooling system IIII I
Evaporative emission control system II
Drive chain Every 1.000 km (600 mi) I, L
Drive chain slider IIII
Brake fluid IIII I2 years
Brake pads wear IIII I
Brake system IIII I
Brake lock operation IIII
Headlight aim IIII I
Sidestand IIII I
Suspension IIII I
Nuts, bolts, fasteners IIII I
Wheels/tires IIII I
Steering head bearings IIII I

Legend: I = Inspect, R = Replace, C = Clean, L = Lubricate


GS, CH Type

Items (Distance in km) 1.000 6.000 12.000 18.000 24.000 30.000 36.000 Annual check Regular replace
Fuel line III I
Throttle operation III I
Throttle body (For CH type) CCC
Air cleaner RR
Air cleaner (For CH type) RRR
Crankcase breather CCCCC C
Spark plug EVERY 24,000 km (16,000 mi): I
EVERY 48,000 km (32,000 mi): R
Valve clearance I
Engine oil RRRR R
Engine oil filter RR
Clutch oil filter RR
Engine idle speed III I
Radiator coolant III I3 years
Cooling system III I
Evaporative emission control system I
Drive Chain EVERY 1,000 km (600 mi): I, L
Drive chain slider III
Brake fluid IIIIII I2 years
Brake pads wear IIIIII I
Brake system IIIIII I
Brake lock operation III
Headlight aim III I
Sidestand III I
Suspension III I
Nuts, bolts, fasteners III I
Wheels/tires III I
Steering head bearings III I

Legend: I = Inspect, R = Replace, C = Clean, L = Lubricate


Maintenance Notes

The maintenance schedule above is based on the official Honda Owner’s Manual and Workshop Manual for the Honda Forza 750 (NSS750). Depending on riding conditions, such as frequent short trips, dusty environments, or high-speed riding, Honda recommends performing certain maintenance items more frequently. Always refer to the latest Honda documentation for your specific model year.

The Honda Forza 750 is Honda’s flagship sport GT scooter featuring a 745 cc parallel-twin engine, Dual Clutch Transmission (DCT), electronic ride modes and cruise control. This page contains one of the most comprehensive Honda Forza 750 technical specification databases available online, including official specifications, workshop data, maintenance information, dimensions, suspension settings, engine specifications and electrical data.

Engine


Type  Liquid-cooled four-stroke, 8-valve SOHC parallel-twin engine
Cooling systemLiquid cooling
Cylinder capacity745 cc / 45,4 cubic inches
Engine crank angle270° parallel-twin crankshaft
Bore x stroke77 x 80 mm / 3 .03 x 3.15 inches
Compression ratio10,7:1
Valve driveSingle Overhead Camshaft (SOHC)
Number of valvesFour valves per cylinder (two intake, two exhaust).
Valve clearance (cold engine max 35°C)Inlet 0,17 mm (± 0,02 mm)
Outlet 0,28 mm (± 0,02 mm)
Intake valvesOpens at 1 mm lift at -23° BTDC
Closes at 30° ABDC
Exhaust valveOpens at 1 mm lift at -27° BBDC
Closes at -12° ATDC
Connecting rod side clearance (axial clearance)0,15 – 0,35 mm (Service Limit 0,45 mm)
Crankshaft run-out (right side)≤ 0,03 mm (Service Limit 0,03 mm)
Crankshaft run-out (left side)≤ 0,03 mm (Service Limit 0,03 mm)
Main bearing oil clearance0,019 – 0,037 mm (Service Limit 0,05 mm)
Connecting rod bearing (big-end) oil clearance0.026–0.044 mm (Service Limit Not specified)
Timing driveSilent timing chain
Firing order1 – 2
Timing chain tensionerAutomatic hydraulic/spring-loaded (Based on NC750/Integra service data)
Ignition systemFull transistorized ignition
Fuel systemHonda PGM-FI electronic fuel injection system
ECT sensor resistance1.0-1.3 kΩ (at 40°C/104°F)
IAT sensor resistance1.0-1.3 kΩ (at 40°C/104°F)
Fuel injector resistance11-13 Ω (at 40°C/104°F)
Spark plugs2x IFR6G-11K (NGK)
Electrode Gap1,0 – 1,1 mm / 0.039 – 0.043 inch
Ignition timing (‘F’ mark)12° BTDC at idle
Cooling system capacity1,44 Litres
Starter  Electric
Idle speed1.200 ± 100 rpm
Gasoline supplyHonda PGM-FI, Electronic Ride-by-Wire, 38 mm throttle body
Fuel pressure3,4 bar (± 0,5 bar) / 50 psi
Fuel pump flow (at 12 V)Minimum 319 cm³ per 10 seconds
EVAP purge conirol solenoid valve resistance30 – 34 Ω (at 20°C / 68°F)
Fuel level sensor resistanceFull 7 – 11 Ω
Empty 384 – 396 Ω
Open air temperature sensor resistance4.9 – 5.1 kΩ at 25°C (77°F)
Maximum output (Driver’s licence A)43,1 kW @ 6750 rpm / 58.6 HP @ 6750 rpm
Maximum output (Driver’s licence A2)35 kW @ 6,000 rpm
Specific power57,7 kW/Litre / 79,2 HP/Litre
Fuel typeUnleaded gasoline (95 RON minimum, E10 compatible)
WMTC fuel consumption3,6 litres/100 km (27,7 km/l) 65.34 mpg
Maximum torque69 Nm @ 4.750 rpm/ 51 lb-ft @ 4.750 rpm
Approximate engine assembly weight67,9 kg / 149.7 lbs
Emission detailsClosed-loop three-way catalytic converter, emission standard Euro 5+

Electrical system


Alternator (ACG)480 Watt @ 5000 rpm
Battery12 Volt/11 AH, maintenance-free battery
HeadlightDaul LED headlights with high beam
Rear lightBrake light / Rear light LED
Starter900 Watt

Transmission


Transmission6-Speed Dual Clutch Transmission (DCT)
ClutchWet multiplate hydraulic dual-clutch
Gear ratio1st gear : 2,666
2nd gear : 1,904
3rd gear : 1,454
4th gear : 1,178
5th gear : 0,967
6th gear : 0,815
Gearshift patternAutomatic operation with manual electric gear selection, or left-hand-operated manual gear selection, N-1-2-3-4-5-6
Reduction ratio (primary / final)1,921 / 2,235
Final driveChain, type DID520V0
Number of links118
Drive chain slack40 – 45 mm (1.6 to 1.8 inch)
Standard sprocket sizeDrive sprocket 17T, Driven sprocket 38T

Chassis


Frame  Diamond steel frame
Wheelbase1580 mm / 62.2 inch
Head tube angle27°
Wheel castor trail104 mm / 4.1 inch
Front suspension41 mm Showa SFF-BP USD telescopic fork, 120 mm / 4.7 inches travel
Steering angle of movementLeft 38° / Right 38°
Rear suspensionPro-Link swingarm, single shock, 120 mm/4.7 inches travel
Front suspension travel120 mm / 4.7 inch
Rear suspension travel120 mm / 4.7 inch
Front brake310 mm Double hydraulic disc with radial four-piston caliper
Rear brake240 mm Single hydraulic disc with single-piston caliper
ABS System TypeTwo-channel ABS
Front wheel materialAluminium cast
Rear wheel materialAluminium cast
Front carrying details and capacityStorage compartment (right side)
Rear carrying details and capacityUnderseat compartment (Fits one full-face helmet)

Tyres

Front wheel17M/C x MT3.50
Rear wheel15M/C x MT4.50
Front tyre120/70 17 inch
Front tyre speed rating58H
Tube / TubelessRadial, Tubeless
Full specification front tyre120/70 R 17 M/C 58H TL
Tyre pressure front2,5 bar / 36 psi
Minimum tread depth (Front)1,5 mm (0.06 inch)
Balance weight front wheel (max.)60 gram
Rear tyre160/60 15 inch
Rear tyre speed rating67H
Tube / TubelessRadial, Tubeless
Full specification rear tyre160/60 R 15 M/C 67H TL
Tyre pressure Rear2,5 bar / 36 psi
Minimum tread depth (Rear)2,0 mm (0.08 inch)
Balance weight rear wheel (max.)60 gram

Lubrication

Engine oilSynthetic SAE 10W-30 Engine Oil
Amount of Engine oil (refill)3,1 litres
Amount of Engine oil (including oilfilter change)3,4 litres
Oil level difference between MIN and MAX0,5 litres
Oil filterHonda Oil Filter PartNo. 15410-MCJ-505
Lubrication systemTrochoid
Oil pressure at idle1,1 bar (± 0,2 bar) at engine oil filter @ 80°C
Oil pressure at 3500 rpm 3,5 bar (± 0,5 bar) at engine oil filter @ 80°C
Oil pressure at 5000 rpm 4.8 bar (± 1,5 bar) at engine oil filter @ 80°C
LubricationSemi-dry sump

Suspension


Front suspension typeUpside down fork Ø 41 mm, 120 mm stroke
Type suspension oilSAE 7,5
Front suspension size41 mm
Front suspension travel120 mm / 4.7 inch
Adjustable front fork preloadNo
Adjustable front rebound dampingNo
Central front strutNo
Steering damperNo
Rear suspension typeSingle Pro-Link monoshock, 120 mm travel
Rear suspension travel120 mm / 4.7 inch
Rear adjustable spring preloadYes
Adjustable rear rebound dampingNo
Number of rear shock absorbers1
Rear suspension materialAluminum / Steel

Dimensions / Sizes / Contents


Length  2200 mm / 86.6 inch
Width  790 mm / 31.1 inch (incl. mirrors)
Height  1480 mm / 58.3 inch
Wheelbase 1580 mm / 62.2 inch
Seat height790 mm / 31.1 inch
Ground clearance 135 mm / 5.3 inch
Kerb weight236 kg / 519 lbs
Maximum permissible weight441 kg / 972 lbs
Tank capacity  13,2 litres / 3.5 US gallons
Approximate reserve fuel quantity3 litres / 0.8 US gallons
Stand TypeCentre stand / Side stand

Instrumentation


Digital instrumentation5-inch Full-color TFT instrument display
ClockYes (12/24 o’clock indication)
TachometerYes
Trip Odometer2x (Trip A and trip B, incl trip fuel consumption)
Oil Pressure GaugeNo
SpeedometerDigital (km/h)
Engine temperature indicationYes
Fuel Level Indicator6-segment indicator

Facts  


Acceleration 0-100 km/uurApproximate 5,6 seconds
Available colorsMatte Warm Ash Metallic
Matte Ballistic Black Metallic
Pearl Glare White
Drivers licenseDriver’s licence A, A2 licence version available
Vehicle categorySport/Touring Scooter
Warranty5 Years
Service intervalsOverview of service intervals
Model Year Introduced2021
Number of seats2
Speed Governor (Cruise Control)Yes
Self-Cancelling IndicatorsYes
Top speed168 km/h / 105.6 mph
Traction controlHonda Selectable Torque Control
Riding modes3 predefined riding modes (Sport, Standard, Rain) and 2 user-defined modes.
Minimum turning radius2,8 meter
Noise Level (dB)L-WOT 76.5 dB (Wide Open Throttle) / L-Urban 71.3 dB
EU Type Approval (Regulation (EU) 168/2013)
Power outletUSB Type-C Socket
Recommended retail price NL  €14.990,-
Recommended retail price BE  €13.990,-


Sources and References

  • Honda Official Specifications
  • Honda Owner’s Manual
  • Honda Workshop Manual
  • European Type Approval Documentation
  • Measurements verified by Heerings.net

Document: Honda_Forza_750_NSS750_Shop Manual_2021_EN.pdf